● 4x4 Dante network amplifier
● Power：4*1000W@8Ω 4*1600W@4Ω
● Built-in DSP processor
● Support USB, TCP/IP, RS232,RS485
● The working status of the amplifier could be monitored remotely in real-time
● Support XLR balanced input and RCA unbalanced input
● Support stereo, bridge, mono channel, free matrix mode, one-key to switch
● Input sensitivity adjustable 0dBu/6dBu/12dBu, setting from software or LCD screen
● Power supply AC180V-264V
● Controled by software, could also control matrix system and professional processor
● Support 70V/100V or 4-8Ω signal output
| Model | DDA410D |
| Number of Channel | 4 |
| Power | 4*1000W@8Ω 4*1600W@4Ω |
| Bridge Power | 2*3200W@8Ω |
| Minimum Output Impedance | 4Ω/each channel |
| Input Interface | Balanced input 4*XLR |
| Output Interface | 4*Spoken; 4*terminal |
| Maximum Input Level | 20dBu/7.75V |
| Sensitivity | 12dBu, 6dBu, 0dBu |
| SNR | 103dB@12dBu, 1kHz |
| Frequency Response | 20Hz ~20kHz (±0.5dB) @1W, 8Ω |
| THD+N | <0.08%@1W, to full power |
| Sampling Rate | 48k/24bit |
| Constant Voltage and Constant Resistance | 100V&70V, 8Ω&4Ω |
| Dante (Optional) | 4-channel Dante |
| Display Screen | 4.3" IPS capacitive touchscreen |
| Protection | Audio limiter, high temperature, DC, high frequency, short circuit, back-EMF, peak current limiter, surge current limiter, start-up delay, power circuit breaker protection, and power supply overvoltage/under voltage protection |
| PC Software | Can control media matrix, audio processor, DSP power amplifier, and active DSP module |
| Power Supply | Voltage input 180/264VAC |
This site is protected by DSPPA audiovisual and also applied to web browsers' Privacy Policy and Terms of Use.
Email Us