Loading...
● Wall mount active monitor speaker units
● Rated power 2x30W (one master speaker and one slave speaker)
● Built in high efficiency digital power amplifier module
● With two tone control of Bass & Treble
● Black & white colors available, better blend into the surrounding
● Wall mount install kits included for convenient installation
Item | Specification | |
LINE input (RCA &3.5) | Input impedance | 10K |
Sensitivity | 300mV | |
Frequency response(20Hz- 20KHz) | ±1.5dB | |
Distortion degree | 0 . 1% | |
Signal-noise ratio | 81dB | |
BASS gain(100 Hz) | ±8dB | |
TREBLE gain(10 KHz) | ±8dB | |
AUX1 (alarm Signal input) | Input impedance | 10K |
Sensitivity | 1V | |
Frequency response(20Hz- 20KHz) | ±1.5dB | |
Distortion degree | 0.1% | |
Signal-noise ratio | 81dB | |
AUX2 (broadcast Signal input) | Input impedance | 10K |
Sensitivity | 500mV | |
Frequency response(20Hz- 20KHz) | ±1.5dB | |
Distortion degree | 0.1% | |
Signal-noise ratio | 81dB | |
MIC input (XLR &6.3) | Input impedance | 600 |
Sensitivity | 40mV @ XLR input | |
300mV @ 6 .3 input | ||
Frequency response(80Hz- 16KHz) | ±3dB | |
Distortion degree | 0.1% | |
Signal-noise ratio | 70dB | |
BASS gain(100 Hz) | ±8dB | |
TREBLE gain(10 KHz) | ±8dB | |
Pre-out signal input | Output amplitude | 1.0V |
Frequency response(20Hz- 20KHz) | ±1.5dB | |
Distortion degree | 0 . 1% | |
Signal-noise ratio | 90dB | |
Power amplifier system | Rated power | 2×30W/8 |
Signal-noise ratio | 81dB | |
Channel separation | 60dB | |
Speaker | Low pitch unit | 5 inches |
High pitch unit | 1 inches | |
Sensitivity | 90dB±2dB | |
Max imum sound pressure level | 105dB±2dB | |
Frequency response | 80Hz-20KHz | |
Distortion degree | 5% | |
This site is protected by DSPPA audiovisual and also applied to web browsers' Privacy Policy and Terms of Use.
Email Us