Rated power 40W.
Embedded Dante PoE amplifier module.
Using eight 2.75-inch full-range units constitute the sound column speaker
Frequency response to 130Hz-20kHz.
The box is made of imported laminate, surface baking paint process.
A variety of installation methods and the corresponding optional installation accessories, suitable for installation in a variety of places
The DT4008 speaker is a new 8-unit structure and surface spraying fine point lacquer process of the full-range sound column speaker. The short-term power of the speaker can reach 300W(GB/T12060.5-2011 standard). The design of the symmetrical magnetic circuit of the unit reduces the odd harmonic distortion in the low frequency part to a low degree, fully satisfying the demand of the human ear for sound quality.
DT4008 cabinet is composed of domestic laminate, its special wooden wedge type cabinet structure, the entire cabinet does not use a nail. The surface polyurethane paint has strong resistance to wear and tear. The tensile strength of the cabinet itself can reach 3500N. The lifting method of the loudspeaker adopts the special lifting form to bear the tension at a single point can reach to 3000N, can fully meet the single point of tension for the entire product 7 times the Safety Standard requirements. The material used for the surface net of the sound box is Q235, and the surface adopts powder spraying process, so that the surface net not only has high strength, and has a very good resistance to salt spray, its ability to resist salt spray (salt spray). Its ability to resist salt spray (5% sodium hydroxide) reaches 48 hours.
The installation of 8 units on the same plane can make the vertical directivity of the speaker control in the range of 40 ° , to improve the diffusion distance of the speaker. The speaker we use a lot of new materials, because people are more sensitive to the treble we have a special unit for some high-frequency extension of the processing, the unit using a special round cloth edge is also the use of the characteristics of the cloth edge to extend the high frequency.
This speaker is mainly used in large and medium-sized conference rooms, multi-functional halls, churches, auditoriums and performance venues, religious clubs, schools, luxury theaters, and is equipped a variety of mounting accessories (optional), can be mounted vertically on the bracket (vertical installation) and can also be hung on the vertical wall (adjustment angle of 10 ° ), can also be suspended on the ceiling. At the same time, the most important feature of the speaker is that it can also be combined with hanging. The most important feature of the DT4008 speaker is that it can also be used in combination.
Model | DT4008 |
Rated Power | 40W |
System Type | Passive Lacquered Wooden Speaker |
Driver Unit | 8×2.75” Full Range Unit |
Input Impedance | 5Ω |
Frequency Response | 130Hz-20kHz |
Sensitivity (1W,1M) | 90dB±3dB |
Max. SPL (1M) | 106±3dB |
Distortion | <2% |
Directivity (H×V) | Vertical: 25° Horizontal: 160° |
Cabinet | Square Box, Laminate |
Installation | 8 Hanging Points |
Surface Treatment | Black Polyimide Spray |
Wire Mesh | Black Powder Coated Plastic, 1.0mm Steel Perforated Plate |
Connector | RJ45 Port |
Control Method | Dante Controller (Common Software) & PoE Dante 1.1.1818 (Product Adjustment Software) |
Product Size (W×D×H) | 104×130×610mm |
Package Size (W×D×H) | 185×160×675mm |
Net Weight | 5.2kg |
Gross Weight | 5.8kg |
This site is protected by DSPPA audiovisual and also applied to web browsers' Privacy Policy and Terms of Use.