16-Channel Intelligent Power Sequence Controller D6586D

The unit adopts industrial-grade touch LCD screen, which can display the current power indicator of each channel, date, time, week, channel switch status and timing point information, with delay on/off (1~999s) for each channel, with touch screen function.

Each channel can be set with timing switch time and multiple timing plans, and can be set to single on/off or cycle on/off and cycle timing on/off. It has built-in high-precision clock chip, which can be set according to the date and time without manual control, for automatic network time calibration function, easier for device management.

With a professional network port web page (computer, Android phone, Apple phone, iPad) login management and control operation for stronger management function in system integration. The RS-232 serial control protocol supports external central control device control, and the RJ45 fixed one-in-one-out on-line port requires no ID number to achieve system installation and turn on devices in order from front to back, and turn off them from back to front.

Using universal socket to be compatible with the power connector of all products; standalone 16-channel power supply, equipped with power filter, 2U chassis, and air switch device, beautiful in outlook, fine in workmanship.

With special over-current detection and alarm function, to provide reliable guarantee for your device, with a maximum input current of 63A, a maximum output current of 16A for a single channel, and the operating voltage of 95V-240V.

Can achieve remote centralized control, as each device can be set with IP, server IP, port, device on-line ID, and each group name can be self-defined.

With three operating modes: manual mode, cascade mode, and timing mode. In manual mode, you can add scenario mode.

The device is powered by terminal blocks, with 63A high-current air switch and standard 10-square large cable input.

Equipped with various interfaces, including 1 central control RS232 male connector, 1 USB power port, 1 RJ45 network port, and 1 RJ45 straight input/output connector. Support wireless WIFI AP mode to connect mobile phones, tablets, computers and other terminal devices for web control.

Support web control page with password login, and the password can be changed for easy access.

The unit adopts a professional industrial-grade power detection program for acquisition, and utilizes a professional power algorithm for calibration, making the parameters more real-time, with the error controlled in the minimum range, and voltage, current, power, and power factors clear at a glance.

Output power socket: The 16 controlled universal sockets on the rear panel are adapted to different standard requirements (universal socket, European standard socket, US standard socket).

Socket standard: Compatible with national standards 6A and 10A, with a maximum current of up to 16A.

Switch interval: Can be set freely from 1-999s.

Can display the current current, power, voltage parameters in real time, and can monitor the power system remotely and easily.

Can trigger 16-channel power sequence switches through the 8-shaped power input connector.

The device comes with a power straight connector.

Chassis height: 2U (88mm).